Відео

Man ! that's a great looking and sounding saw !👍

As the outside door handle was broken already, I finished breaking it and used a flat head screwdriver to pop Down on the outside latch lever that is at the rear most notch of the outside door handle assembly.

Just for other people who come across this, I'm working on a customer's Van and it too was the DC Solenoid (Pins 10-20) Mine came back with 5.5Ohms resistance. I had Error codes: P076A - Powertrain P2807 Powertrain Pressure Control Solenoid G

Wish you showed putting on belt in better detail. Trying to get mine on but don’t get this tensioner ?

I’m gonna check it out See what happens. Take her easy. Thanks for the tip.

It’s good to see someone, other than me, likes to clean the project up before working on it. Most people are just lazy! SHES A KEEPER!

I don't believe it I did that in my bed check battery alternator light went off

I have a question for you I have a 2008 Town and country Chrysler touring van I've got a brand new battery on it but I have to jump it because it will not start I've had the alternator tested the starter tested I've had all the electrical in the fuses tested... But I cannot figure out what is causing this problem do you have any suggestions

Gostava de ver a mola pequena que trava a corrente

That is the most hillbilly thing I have ever seen…and it just fixed the battery light on our van. What the heck😳😂

do you have to drain oil before removing the panel?

Hi Murray Great work looks like your a puzzle figure outer Ha ha ! I one too Long story I found one way back when i was in my twenties at the local dump and my father was a avid gardener so I brought it home for him! He was a tinker also and he got it working and used it for years Price was right! Thanks for the video.

Ok it seams like it worked, but how long should it take for the battery light to go off

I have the identical outboard!

Do have more on how you did the fuel fitting

Outstanding Effort on the video. Your attention to detail is much appreciated. I don’t even have one of these cars and still watched the whole tutorial. I like to learn how things work. I am thinking about buying one of these little vans. Would you recommend doing so? Or did it have to many issues? Thanks again for making the video.

Yes they are loud...but they made great power...that is one fine saw you have there... hickory was like butter for that thing..

Do I drain Trans fluid before repair ?

is that metal now?

Should have put in a new fuel pump while you had the bed off, so you don't have to worry about it later.

I am currently trying to restore this I got off my grandfather. I replace the fuel lines, I’m getting gas just no spark. I’m replacing the spark plug today. Any suggestions if it’s not the plug?

my grandpa had one of those craftsman top handles, same as that one. we lost it moving a while back in 2016

It worked! Thank you. 01/28/2024

Good video brother simple and direct explanation..

Noicccce!

78 to 85 what I found on them buddy of mine had 2 of them

Hey great video I just did mine a day ago but now it doesn’t want to go forward and help with that thanks

excellent video, with lots of very interesting explanations. In your opinion, why does my gearbox, when it reaches more than 80° and when I almost come to a stop, the engagement of first gear is sometimes a little abrupt and sometimes idling is a problem a little unstable. Thank you for your response, it would help me a lot. 130000km

I can’t get my hex bolts off to take of the carburetor. What tool did you use to loosen the hex bolts on the carburetor ?

I have the same snowblower. One of my carb hex bolts is stripped and won’t come off and I can’t get the carburetor off. Probably gonna just throw the whole damn snowblower in the garbage. Piece of junk snowblower in my experience. Never starts when you need it.

Nice work! I built one similar for my cub cadet.

I just did mine. Word of advice tap it out clockwise. Don’t bang on one side more than the other. It will wedge itself in the block potential damage to the block.

Love this video. Straight to the point 9pm and I was heading to work. Fired van up. Battery light on Hitting the end of alternator got me on the way!

On the bottom side of the pump there's a grove to put a flat head screw driver and pry it off. You didn't have to go thru that much trouble

Did you get the old one fixed or rebuilt in case you had to do this again?

I have a 2013 doge grand caravan thats stuck in limp mode. And its throwing a P0760 code overdrive solenoid contol circuit. Do you know which soliend this is or which one i have to change? The vehicle has 88,000 miles on it

@2:45 "the cylinder is going up and down" and after running it like that in doors you're lucky to be alive.

what size sockets are needed to replace and install the bolts attached to the wheel fender?

I never sausage a thing like that!😊

how did you get the connector off?

would it have been possible to check he solenoid pack while it was still in the vehicle?

Your camera work is impeccable 😂

Amazing video, can I ask you where you purchased the parts?

I have an 89 I bought new. Need to take carbs off and clean them

I see the larger spring goes on the tab of the paddle...where does the smaller spring connect to? One end is in the linkage hole on the paddle what about the other end?

Great build might have to add one to my 314.

Looks to me like the best first cut set up and system

Picked up one of these on the side of the road, excited to see if we can get it goin

But did you check inline fuse?I would either replace alternator or pulley clutch

I can’t believe how good condition the wheel’s are in😮😅😊